• <xmp id="i8wqe"><legend id="i8wqe"></legend>
  • Language:中文 | English | German
    Current PositionEnglish> News>Content

    FT6 FR6 Firmware Update Notice

    Author: CopyFrom: DateTime:2021-04-15
    Editor:康梅琴 Hits: Size:Small Big

    FT6 FR6 1200 英文

    FT6 & FR6 add RTSP function, support APP monitoring, improve the color difference problem.

    Download Instruction

    Click the file package link FT6 FR6 Upgrade program.zip" and download it.

     

    Operation Steps of Upgrade

    1. Unzipping the file package, and then upgrade FT6 & FR6 to 56 program V1.3.6.

    1.1 Copy the file "FW02.bin" from the "V56 program V1.3.6" folder to the U disk and insert it into the attached Type-C to USB connector, and then insert it into the Type-C interface of the monitor. (remark: please turn off the monitor, and take out the battery or the power adapter for this step.)

    圖片1

    圖片2

    1.2 After completing step 1.1, please install the battery or the power adapter, and then turn on the monitor.

    1.3 Find the “Firmware Update” on the menu, then tap “>”to upgrade.

    A progress bar will appear on the screen indicating that the program is being imported.

    Just wait for the flashing red and green lights alternately indicate that it is upgrading.

    When the light turns red, the upgrade is complete. The monitor will restarting automatically.

    圖片3

    2. Update the Wifi firmware program (the smart phone or PC need to support 5G wifi)

    2.1 After the transmitter FT6 power on, turn on the channel on the right side of the screen and find SSID + 6 numbers (SSID:0C0142 as shown in the figure below). Open WIFI on your PC or smartphone, then find out the CVW0C0142 and click “connect”, enter the password:12345678

    圖片4

    圖片5

    2.2  Key in the IP address 192.168.1.100 in the browser, User: admin, Password: admin@123

    2.3  Click “Login”, click “Upgrade” after login, and then choose the file “CP6038_v1.09.3_FW_upgrade.bin” from the “Wifi firmware program” folder, click OK start upgrading.

    圖片6

    圖片7

     

    2.4 After upgraded, you can see the Wifi FW + 6 numbers

    圖片10

    2.5 Turn on FT6 & FR6, press WPS separately to pair. The FT6 and FR6 can be connected after success pairing.

     

    3. Upgrade the transmission module firmware of the receiver FR6

    3.1 After finishing the pairing, turn on Wifi again and find FW + 6 numbers  click “connect”, then enter the password 12345678

     

    3.2 Key in IP address 192.168.1.120 in the browser, then choose the file “cnc-nand_rootfs_rx.bin” from the folder “Transmission Module Firmware” and upload, and then click “save environment”.

    圖片17

    3.3  After saving, remove the part behind the IP address (see below picture ), refresh the page and check if it is updated to version 3.72

     

    4. Upgrade the transmission module firmware of the transmitter FT6

    4.1 Key in IP address 192.168.1.110 in the browser, then choose the file “cnc-nand_rootfs_tx.bin” from the folder “Transmission Module Firmware” and upload, and then click “save environment”.

    4.2 After saving, remove the part behind the IP address (see below picture ), refresh the page and check if it is updated to version 3.72

    After operating all the steps, the entire upgrade is completed.

     

    Reminder: The firmware of the transmitter and receiver can’t be contrary.

     

      沒有相關內容
    中文字幕V亚洲日本在线电影,免费无码中文A级毛片,免费无码中文A级毛片,国产精品不卡av在线观看
  • <xmp id="i8wqe"><legend id="i8wqe"></legend>