• <xmp id="i8wqe"><legend id="i8wqe"></legend>
  • Language:中文 | English | German
    Current PositionEnglish> News>Content

    FEELWORLD LIVEPRO L1 Video Switcher Firmware Update V0.40

    Author: CopyFrom: DateTime:2020-11-07
    Editor:康梅琴 Hits: Size:Small Big


    /LIVEPRO L1upgrade

    In order to improve the user experience, we upgraded LIVEPRO L1 to version 0.40.

    Download Link



    Download Process

    Click the link to enter the LIVEPRO L1 details page of the website, click “DOWNLOAD” (see the following picture), and select the LIVEPRO L1 upgrade package to download. The upgrade package contains upgrade file, upgrade tool, content update and upgrade instruction.



    Main Content Update:

    1. Modify the volume knob, press the knob to display the volume bar before adjustment

    2. Modify the PVW window ratio to 16:9

    3. Increase output resolution 720p50, 1080p24/25

    4. Modify the audio setting menu, add fixed audio output


    Operation Steps for Upgrade:

    1. Prepare tool: Upgrade package, XTOOL V1.0.1.9 upgrade cable


    2. Upgrade Method: LAN port upgrade

    2.1 Turn on the power on LIVEPRO L1 and use LAN cable to connect device.

    2.2 The default IP is, so make sure the PC and device are in the same IP segment. As the picture show to check if your PC in the same IP segment.

    LIVEPRO L1pic1


    2.3 Open the upgrade tool XTOOL, click Connection

    2.4 Choose Net Comm in pop up window and confirm

    L1 connection


    2.5 Upgrade Program

    After communication setting is done, the status light in bottom left turns green. Choose the upgrade file and open it. Usually, we just choose MCU or FPGA bin file to upgrade, but you also can select all by the XTOOL automatically. After selecting, click “Upgrade” and it will start to upgrade .

    L1 choose file

    L1 green light


    2.5.1  During the process of upgrading, each upgrading status and upgrade result of each program file is showing.



    2.5.2  After upgrade is done, there will pop up a window showing “New Version Upgraded” then users need to reboot the device to let the new version take effect.


    2.5.3  Click “Version” XTOOL will show the latest version info of the device so that users can check if the upgrade is successful or not.


  • <xmp id="i8wqe"><legend id="i8wqe"></legend>